(80mm) Polystyrene board for wall insulation

New product

Wall insulation boards - EPS 031 - FASADA EXTRA PLUS has a significantly lower  (compared to standard polystyrene) a heat transfer coefficient λ which reaches 0.031 W / m2. This excellent thermal insulation performance is achieved through the use of a special graphite-based material that gives the plates a characteristic gray-to-gray colour.

Collection Only from Coventry Warehouse

For delivery Quote please contact customer service

More details

This product is no longer in stock

£22.33 VAT incl.

£22.33 per pack

15 Kg
Delivery: 3 to 8 weeks

Data sheet

Height50 cm
Width100 cm
Depth8 cm
SQ M in a Pack3.5 sq m
Materialpolystyrene
Size8/50/100 cm
Thermal conductivity coefficient λd0.031 W / sq m
Flexural strenght KPa ~100 KPa
Tensile strength KPa ~100 KPa
Boards in a Pack7
Thermal Resistance (R value) [m2K/W]2.55

More info

 80mm thick External wall insulation boards - EPS 031 - FASADA EXTRA PLUS has a significantly lower (compared to standard polystyrene)

A heat transfer coefficient λ which reaches 0.031 W / m2.

Thermal resistance for 80mm polystyrene Rd - 2.55 [m2K/W]

Reaction to Fire class - E

This excellent thermal insulation performance is achieved through the use of a special graphite-based material that gives the plates a characteristic gray-to-gray colour.

Application:

External wall insulation

Lying:

Application and incorporation are made exclusively using dedicated dispersion based (cement), polyurethane foam or water-based dispersion (gray) based adhesives (see technical data / adhesive manufacturer's instructions). It is recommended to sand the boards directly before gluing to increase adhesion of the mortar.
During storage and assembly - due to the steel-gray color of the boards - it is imperative to protect their surface against direct - temporary and long-term exposure to sunlight.

ATTENTION: in contact with polystyrene boards, do not use any substances containing organic solvents or other destructive substances on the structure of the boards.


Mechanical fastening (pinching) is performed at least 24 hours after gluing of the boards.

When glued to the surface of walls or components construction so do so Reinforcing layer.

Transport:

Polystyrene boards should be transported  and store protected from mechanical damage, away from sources of ignition, organic solvents and their vapors

Delivery:

Collection Only from Coventry Warehouse

For delivery Quote please contact customer service

Reviews

Write a review

(80mm) Polystyrene board for wall insulation

(80mm) Polystyrene board for wall insulation

Wall insulation boards - EPS 031 - FASADA EXTRA PLUS has a significantly lower  (compared to standard polystyrene) a heat transfer coefficient λ which reaches 0.031 W / m2. This excellent thermal insulation performance is achieved through the use of a special graphite-based material that gives the plates a characteristic gray-to-gray colour.

Collection Only from Coventry Warehouse

For delivery Quote please contact customer service

30 other products in the same category: