Ready to use Tile adhesive Power Elastik 5kg
(£12.72 per 5kg bucket)
POWERELASTIK ADHESIVE FOR DECORATIVE AND FACADE STONE TILES , flexible, high bonding strength, multi-purpose, for indoor and outdoor use. Frost-proof and waterproof.
14 Days Return policy
POWERELASTIK – dispersion adhesive in the form of a thick paste, applied in thin layers (approx. 2 – 3
mm), flexible, high bonding strength, multi-purpose, for indoor and outdoor use. The product is not suitable for applications, where the adhesive layer is thicker than 4 mm. Frost-proof and waterproof. Will not stain natural stone.
Bonding of decorative stone and concrete, gypsum, clinker and ceramic tiles on walls and floors. The substrate may be concrete, cement aerated concrete, bricks, cement and cement/lime plaster, drywall.
The surface must be fully cured, clean and dry, free from any insulating layers. Unstable layers with insufficient adhesion must be removed. Concrete substrates must be at least 6 months old, plasters and cement screeds at least 4 weeks old, and anhydrite screeds at least 2 weeks old.
Anhydrite screeds must be sanded and dusted.
Prime the surface with an appropriate Alchem wall primer.
PREPARATION OF THE ADHESIVE:
POWERELASTIK adhesive is ready to use after opening the bucket. Stir the product well in the container.
Apply the adhesive directly on the substrate or tile with a notched trowel with notch depth up to 4 mm, held at an angle of 45°- 60° to the tile surface.
Storage time at temperatures above +5 °C and not higher than +25 °C, in factory sealed buckets: 12 months from the manufacturing date printed on the cover.
• Coverage up to ~2,5 m² max
• Application temperature (air, substrate, material) from +5 °C to +25 °C
• Open time up to 20 minutes
• Tile alignment correction time up to 20 minutes
• Full curing time 7 days.
May cause an allergic reaction: Contains a post-reaction mixture of 5-chloro-2-methyl-2H-isothiazol- 3-one and 2-methyl-2H-isothiazol-3-one (3:1); 4,5-dichloro-2-octyl-2H-isothiazol- 3-one.